How To Reset Spypoint Camera To Factory Settings?

If you find yourself needing to reset your SpyPoint camera to its factory settings, following the steps below will help you achieve this.

  • The first step is to power on the camera.
  • Locate the small button at the bottom of the camera.
  • Using a tiny tool like a pin or paperclip, press and hold the button down for 10 seconds until you see the camera’s red and green lights flash alternatively.
  • Release the button after the flashing lights have stopped.
  • You can now power off the camera and then power it back on.

After following these simple steps, your SpyPoint camera will return to its factory settings. This means that any previous user settings, including Wi-Fi connections and network configurations, will be erased. You can now set up the camera afresh and configure it according to your needs.

While resetting a SpyPoint camera to its factory settings can be an effective troubleshooting step, it should be noted that this process can also have the potential to cause data loss. As such, it is essential to make sure that you have a backup of any important media and data files before performing a factory reset. Ultimately, patience and care are critical when resetting the camera, so make sure to take your time and follow the instructions carefully to avoid any unnecessary accidents.


1. How do I reset my Spypoint camera to factory settings?

To reset your Spypoint camera to factory settings, you need to access the camera’s settings menu. From here, navigate to the “Reset” or “Default” option and select it. This will prompt the camera to restart and reset to its default settings.

2. Will resetting my Spypoint camera delete all of my footage?

No, resetting your Spypoint camera to factory settings will not delete your footage. However, it will reset all of your camera settings to their default values, so you’ll need to reconfigure your camera settings after resetting.

3. What should I do if I can’t access my Spypoint camera’s settings menu?

If you’re unable to access your Spypoint camera’s settings menu, you may need to perform a hard reset. To do this, locate the reset button on the camera (usually found near the battery compartment) and press and hold it for several seconds. This will reset your camera to its factory settings.

Leave a Comment