How To Reset Revo Camera System?

To reset a Revo Camera System, follow these steps:

1. Disconnect the camera system from the power source. It is important to turn off the system before performing a reset.

2. Locate the reset button on the back of the Revo Camera System. It is usually a small pinhole that is labeled “reset.”

3. Insert a small object like a paperclip or toothpick into the reset button and hold it down for at least 10 seconds. The system will restart and all the settings will be reset to the default.

4. Once the system has restarted, it is important to reconfigure the settings according to your preference.

5. You may also need to reset the individual cameras connected to the Revo Camera System. To do this, locate the reset button on the back of the individual cameras and repeat the same process as before.

6. If you are still experiencing issues with your Revo Camera System, you may need to contact customer support for further assistance.

In summary, resetting a Revo Camera System involves disconnecting the power source, locating the reset button, holding it down for at least 10 seconds, and reconfiguring the settings. Remember to reset each individual camera as well if needed. Contact customer support if issues persist.

Commonly Asked Questions

1. How do I reset my Revo camera system?

To reset your Revo camera system, first, power off your DVR by unplugging it or turning off the circuit breaker. Then, press and hold the reset button on the back of the DVR for at least 15 seconds. Finally, release the button and turn the power back on. Your DVR should now be reset.

2. Will resetting my Revo camera system delete my recordings?

Yes, resetting your Revo camera system will erase all recordings, settings, and configurations. Before resetting your DVR, make sure you have backed up any important recordings or settings.

3. What if the reset button on my Revo camera system doesn’t work?

If the reset button on your Revo camera system is not working, you can try resetting the system by accessing the DVR through a web browser. First, connect your DVR to your network and find the IP address assigned to the DVR. Then, type the IP address into your web browser and log in to the DVR using your username and password. Finally, navigate to the system settings and choose the option to reset the DVR.

Leave a Comment