How To Reset Hik Camera?

Resetting your Hik camera might be necessary in certain situations, such as when you forget the password or when you want to start fresh. Here are the steps to reset your Hik camera:

1. Locate the reset button – The reset button is usually located on the back of the camera, near the Ethernet port. It is a small hole that you can press with a paperclip or a thin object.

2. Press the reset button – Use a paperclip or a thin object to press and hold the reset button for about 10 seconds. You will see the camera’s indicator light start flashing, indicating that the reset process has started.

3. Wait for the camera to reboot – After releasing the reset button, the camera will start rebooting. This process might take a few minutes, so be patient and wait for the camera to finish rebooting.

4. Access the camera’s default settings – Once the camera has finished rebooting, you can access its default settings by typing in its IP address in your web browser. The default IP address for Hik cameras is usually

5. Change the camera’s settings – After accessing the camera’s default settings, you can change the settings to your preferred configuration. You will need to set up a new password, as the default password will no longer work.

In summary, resetting your Hik camera is a straightforward process that involves pressing and holding the reset button for about 10 seconds, waiting for the camera to reboot, and accessing its default settings to set up your preferred configuration. Remember to set up a new password to ensure the security of your camera.


1. How do I reset my Hik camera?

To reset your Hik camera, locate the reset button on the camera’s body or obtain the reset code from the manufacturer’s website. Press and hold the button for a few seconds or enter the reset code to initiate the reboot process.

2. Will resetting my Hik camera delete all my footage?

No, resetting your Hik camera will not delete your footage. However, it will reset all the camera’s settings to default, including the password and network configurations. You may need to reconfigure the camera to access your footage.

3. My Hik camera is stuck in a reboot loop. Will resetting it fix the issue?

Yes, resetting your Hik camera can fix issues such as a reboot loop. However, if the problem persists after resetting, you may need to contact the manufacturer’s support team for further assistance.

4. Can I reset my Hik camera remotely?

No, you cannot reset your Hik camera remotely. You need to access the camera physically to locate the reset button or obtain the reset code from the manufacturer’s website.

Leave a Comment