How To Reconnect Ring Camera To Wifi?

If you’re facing connectivity issues with your Ring camera, it’s essential to reconnect it to your Wi-Fi network. Here’s a step-by-step guide on how to reconnect Ring camera to Wi-Fi:

1. Check Wi-Fi Connection: Before getting started with the reboot process, ensure that the Wi-Fi network is working correctly. Check if the Wi-Fi password entered is correct or try a different network to eliminate the possibility of an issue with the Wi-Fi network.

2. Restart Ring Camera: Disconnect your Ring camera from the power source for 30 seconds and then reconnect it. Wait for the camera’s LED light to glow, indicating that it’s powered on.

3. Enter Device Mode: Press and hold down the orange button located at the back of the camera for 20 seconds to put it in Setup mode. Once the LED on the camera starts flashing periodically, release the button.

4. Reconnect to Wi-Fi: Open the Ring app on your mobile device and select the camera from the list of devices. Click on the “Device Health” option and select “Reconnect to Wi-Fi” located at the bottom of the screen. Follow the on-screen instructions and enter the Wi-Fi network credentials. Make sure the password you enter is the correct one.

5. Verify Connection: Once the camera ”walks” you through the reconnection process, wait for it to reconnect to the Wi-Fi network. When the camera has completed the reconnection, a green light will flash. Verify the Wi-Fi connection is working by opening the Live View.

In conclusion, the above steps will guide you on how to reconnect your Ring camera to Wi-Fi. Follow these steps carefully, and you’ll be able to restore the connectivity of your camera within minutes.

Frequently Asked Questions

1. What should I do if my Ring Camera is not connecting to WiFi?

If your Ring Camera is not connecting to the WiFi, the first step is to ensure that your WiFi network is working correctly. You can try restarting your router and modem, or resetting your network settings on the camera. You can also try bringing the camera closer to the WiFi router and disabling any firewalls or VPNs that may be blocking the connection.

2. How do I reset my Ring Camera to connect to WiFi?

To reset your Ring Camera to connect to WiFi, press and hold the orange button on the back of the camera for at least 20 seconds until the light on the front of the device starts to flash. Then, follow the instructions in the Ring app to reconnect the camera to your WiFi network. Remember to have your WiFi network name (SSID) and password ready.

3. Why does my Ring Camera keep disconnecting from WiFi?

If your Ring Camera keeps disconnecting from WiFi, it may be due to a weak WiFi signal, interference from other wireless devices, or outdated software on the camera. To improve the connection, try moving the camera closer to the router, upgrading your WiFi signal with a range extender, or updating the firmware on the camera.

4. Can I use my Ring Camera without WiFi?

While Ring Camera requires WiFi to function fully and connect to the Ring app, it can still capture recordings locally to the device itself in offline mode. However, to live stream the camera footage and receive notifications, the device needs to be connected to a WiFi network.

Leave a Comment