How To Open Blink Camera To Replace Battery?

Opening the Blink camera to replace its battery is a straightforward process that can be accomplished in just a few easy steps. Here is a step-by-step guide to help you out –

1. First things first, gather all the tools that you’ll need for the job. You’ll require a Phillips head screwdriver, a new set of batteries, and of course, your Blink camera.

2. Turn your camera upside down so that you can see the battery compartment. Look for the small latch on the bottom of the camera that holds the cover closed.

3. Use your screwdriver to loosen the screws that hold the cover in place. Be sure to keep the screws in a safe place so you don’t lose them.

4. Once the screws are removed, gently lift the cover off the battery compartment. It should come off easily, but be careful not to force it.

5. You can now access the batteries inside the compartment. Remove the old batteries carefully and dispose of them correctly.

6. Insert the new batteries, making sure they are correctly aligned with the plus and minus symbols on the compartment.

7. Replace the cover, being careful not to over-tighten the screws. Turn the camera back over, and you’re good to go.

Remember that there are different models of Blink cameras, so some may have slight variations in the opening process. However, the steps mentioned above should apply to most Blink camera models. By following these simple steps, your Blink camera will be up and running again in no time.



1. How do I open my Blink camera to replace the battery?

To open your Blink camera to replace the battery, first, turn the camera over and find the slot on the back where the battery door is located. Next, use a screwdriver or something flat and sturdy to push open the door. Once you have opened the battery door, remove the old battery, and insert the new battery. Finally, close the battery door by pushing it back until it clicks into place.

2. What kind of battery does my Blink camera use?

Most Blink cameras use two AA lithium batteries. However, some cameras may use four AA batteries, so it is essential to check your camera’s user manual to determine the correct battery type.

3. How often do I need to replace the battery in my Blink camera?

The frequency with which you need to replace the battery in your Blink camera depends on how often you use the camera and the specific battery you are using. However, it is recommended to replace the battery every 6-12 months to ensure your camera is functioning correctly.

Leave a Comment