How To Change Battery In Adt Doorbell Camera?

To change the battery in an ADT Doorbell Camera, follow the steps given below:

1. First, turn off the power supply to the camera. It is important to ensure that there is no electrical current flowing through the device.

2. Use a screwdriver to remove the screws located at the bottom of the doorbell camera. Keep the screws in a safe place as they will be required to secure the camera back in place.

3. Once the screws are removed, gently remove the front plate from the camera’s body. Be careful not to damage any wiring that may be connected.

4. Locate the battery inside the camera. Depending on the model you have, the battery may be located inside the front plate or the camera’s body.

5. Remove the old battery by gently pulling on it. Make sure to dispose of the old battery properly.

6. Insert the new battery into the camera. Ensure that it is properly aligned with the connectors.

7. Reattach the front plate to the camera’s body and secure it in place using the screws removed earlier.

8. Turn on the power supply to the camera and test it to make sure everything is working properly.

It is important to note that ADT Doorbell Cameras use rechargeable batteries, so it is best to charge the battery fully before use. If the camera is used frequently or in a high-traffic area, it may be necessary to replace the battery more frequently.


FAQs for How To Change Battery In Adt Doorbell Camera

1. How often should I replace the battery in my ADT doorbell camera?

Typically, you should replace the battery in your ADT doorbell camera every 6-12 months. However, this may vary depending on the level of activity, temperature, and other factors that may impact battery life.

2. What type of battery do I need to replace the battery in my ADT doorbell camera?

Your ADT doorbell camera uses a rechargeable 3.7V Lithium-Ion battery. Make sure to purchase a replacement battery that is compatible with your specific model of doorbell camera.

3. How do I replace the battery in my ADT doorbell camera?

To replace the battery in your ADT doorbell camera, start by removing the faceplate of the device. Then, carefully remove the battery and replace it with a new one. Be sure to follow any specific instructions provided by ADT for your model of doorbell camera.

Leave a Comment