How To Change Battery In A Blink Camera?

To change the battery in a Blink camera, follow these steps:

1. Remove the back cover of the camera, as this is where the battery is located.
2. Look for the small tab near the bottom of the battery compartment and gently pull it outwards.
3. Once the tab is pulled, the battery should easily slide out of the compartment.
4. Take the new battery and insert it into the compartment, making sure that the positive and negative ends are facing the correct direction.
5. Once the new battery is in place, gently push the tab back into its original position to secure the battery inside the compartment.
6. Finally, replace the back cover of the camera, ensuring that it is firmly attached.

It’s important to note that when changing the battery, it’s best to use only the recommended battery type for your Blink camera, as using a different battery can cause damage or malfunction. Also, it’s recommended to change the batteries every 4-6 months to ensure that your camera is always working properly.

To summarize, how to change the battery in a Blink camera:

  • Remove back cover of camera
  • pull the small tab near the bottom of the battery compartment outwards
  • Slide the battery out of compartment
  • Insert new battery in proper direction
  • Push tab back into original position
  • Replace the back cover of the camera

By following these steps, you can easily change the battery of your Blink camera and ensure that it continues to work efficiently.

Frequently Asked Questions

1. Can I change the battery of a Blink camera myself?

Yes, it is possible to change the battery of a Blink camera yourself. You just need to make sure that you have the right tools and replacement battery.

2. How often do I need to change the battery in my Blink camera?

The battery life of a Blink camera can vary depending on usage, temperature and the environment. However, on average it is recommended to change the battery every 6 to 12 months.

3. Is there a specific type of battery that I need to use for a Blink camera?

Yes, it’s important to use the right type of battery for a Blink camera. It requires two AA lithium batteries with a capacity of at least 2200mAh, which can be easily found in most stores.

4. How do I know if the battery of my Blink camera needs to be replaced?

The Blink app will notify you when the battery level is low, but you can also manually check the battery status in the app settings. If the device stops working or the LED light is not flashing, it may indicate that the battery needs to be replaced.

Leave a Comment