How Do I Reset My TaoTronics Sound Bar? A Step-by-Step Guide

In today’s world, sound bars have become an essential component for enhancing our audio experience while watching movies or listening to music. However, like any other electronic device, sound bars may encounter technical glitches or become unresponsive over time. If you own a TaoTronics sound bar and are facing such issues, fear not! In this step-by-step guide, we will walk you through the process of resetting your TaoTronics sound bar, allowing you to enjoy seamless audio playback once again.

Checking The Power Source And Connections

When encountering issues with your TaoTronics soundbar, it’s crucial to ensure that the power source and connections are properly set up. Start by disconnecting the soundbar from the power outlet and the audio source. Examine the power cord for any damages and make sure it is securely plugged into both the soundbar and the electrical socket.

Next, inspect all audio cables connected to the soundbar. Ensure these cables are firmly connected to the appropriate ports on both the soundbar and the audio source, such as your TV or other devices. If you notice any loose connections or frayed cables, replace them.

Additionally, verify that the audio source is set to output audio to the soundbar. Sometimes, the issue arises from incorrect audio settings. Review your device’s audio settings menu and confirm that the soundbar is selected as the primary audio output.

Taking these steps to check the power source and connections can often resolve simple issues, allowing your TaoTronics soundbar to function properly without the need for a full reset.

Accessing The Reset Button On The Sound Bar

The reset button on the TaoTronics sound bar is an essential feature for troubleshooting and resolving various issues. To access this button, locate the small pinhole on the back or bottom of the sound bar. This pinhole houses the reset button.

To perform a reset, you will need a small and narrow object, such as a toothpick or paperclip. Insert the object into the pinhole and press and hold the reset button for approximately 10 seconds. Make sure to apply steady and gentle pressure, as pressing too hard could cause damage.

By accessing the reset button, you can easily reset and refresh the sound bar, resolving any minor software or connection-related problems. It is recommended to perform a soft reset before attempting a hard reset or restoring factory settings, as this simple process often resolves most issues.

Remember that the exact location of the reset button may vary depending on the specific TaoTronics sound bar model. Always refer to the user manual for detailed instructions and illustrations related to your device.

Performing A Soft Reset

Performing a soft reset on your TaoTronics Sound Bar is a simple and effective way to troubleshoot any minor issues you may be experiencing. To perform a soft reset, follow these steps:

1. Start by turning off your TaoTronics Sound Bar and unplugging it from the power source.
2. Disconnect any auxiliary cables or devices that may be connected to the sound bar.
3. Wait for about 30 seconds to allow the sound bar to fully power down.
4. Plug the sound bar back into the power source and turn it on.
5. Check if the issues you were facing have been resolved.

A soft reset can help fix common problems such as audio distortion or connectivity issues. It allows the sound bar to refresh and restart, clearing any temporary glitches or conflicts. If the issues persist after performing a soft reset, you may need to perform a hard reset or reset the sound bar to its factory settings. However, a soft reset is usually sufficient to resolve most common issues, making it an essential troubleshooting step for TaoTronics Sound Bar owners.

Resetting The Sound Bar Using The Remote Control

Resetting your TaoTronics sound bar using the remote control is a convenient and straightforward method. This process allows you to reset the sound bar without the need for any physical interaction with the device. Here’s a step-by-step guide to help you through the process:

1. Ensure that the sound bar is connected to a power source and turned on.
2. Grab the remote control that came with your sound bar and make sure the batteries are working.
3. Look for the “Reset” button on the remote control. It is usually located either on the front panel or underneath a small cover.
4. Press and hold the “Reset” button for approximately five seconds.
5. Release the button when you see the LED indicator on the sound bar flashing, indicating that the reset process has begun.
6. Wait for the sound bar to complete the reset process. This may take a few seconds, and the LED indicator should stop flashing once it’s done.
7. Once the reset is complete, you can proceed with the setup process, customizing the sound settings to your preference.

Resetting your sound bar using the remote control can resolve various issues, such as connectivity problems and audio glitches.

Performing A Hard Reset

Performing a hard reset on your TaoTronics sound bar can help resolve more complex issues and restore it to its default settings. Here is a step-by-step guide to performing a hard reset:

1. Locate the power cord at the back of the sound bar and unplug it from the power source.
2. Wait for approximately 30 seconds to allow any residual power to be discharged.
3. While the sound bar is disconnected from the power source, check for any loose connections or damaged cables and rectify them if necessary.
4. Plug the power cord back into the power source.
5. Look for the power button on the sound bar and press and hold it for at least 10 seconds.
6. Release the power button and wait for the sound bar to restart.
7. Once the sound bar has restarted, test it by playing audio from a connected device to ensure the hard reset was successful.

Performing a hard reset can often resolve issues such as freezing, unresponsiveness, or audio distortion. If the problems persist, you may want to consider contacting TaoTronics customer support for further assistance.

Resetting The Sound Bar To Factory Settings

Resetting the TaoTronics Sound Bar to its factory settings can help resolve various issues and restore the device to its original state. To reset the sound bar to factory settings, follow these steps:

1. Turn off the sound bar and unplug it from the power source.
2. Locate the reset button on the back of the sound bar. It is usually a small hole marked “Reset” or “Factory Reset.”
3. Insert a paperclip or a similar thin object into the reset hole and press and hold the button for about 10 seconds.
4. Release the button and wait for the sound bar to restart.

Once the sound bar has restarted, it will be restored to its factory settings, deleting any customizations or settings you have made. This process helps to troubleshoot persistent issues and provides a clean slate for optimal performance.

Remember, resetting the sound bar should be considered a last resort when other troubleshooting methods have failed. If you’re still experiencing issues after resetting, it may be a good idea to contact TaoTronics support for further assistance.

Troubleshooting Common Reset Issues

In this section, we will address some common issues that you may encounter while attempting to reset your TaoTronics Sound Bar. Resetting a device is usually a straightforward process, but occasionally, certain problems may arise.

One common issue is when the sound bar doesn’t respond to the reset process. If this happens, double-check that the power cable is securely plugged in and that the power source is functioning correctly. You can also try unplugging the sound bar for a few minutes before plugging it back in and attempting the reset again.

Another issue that users may face is a frozen sound bar during the reset process. If your device becomes unresponsive during the reset, you can try pressing and holding the power button for about 10 seconds to force a shutdown. Afterward, wait for a few seconds and power the device back on before attempting the reset once more.

If you continue to experience difficulties with the reset, consult the user manual or reach out to TaoTronics customer support for further assistance. Remember to provide them with accurate details about the issue and steps you have already taken to troubleshoot.

Final Tips And Recommendations For Sound Bar Reset

In this section, we provide some final tips and recommendations to ensure a successful reset of your TaoTronics Sound Bar.

1. Read the User Manual: Before attempting any reset, it is crucial to refer to the user manual specific to your Sound Bar model. The manual will provide detailed instructions and cautions to avoid any potential issues during the reset process.

2. Contact Customer Support: If you encounter any difficulties or have unanswered questions during the reset process, don’t hesitate to reach out to TaoTronics customer support. They have experts who can guide you through troubleshooting steps or provide further assistance.

3. Disconnect Other Devices: To avoid any interference, disconnect any auxiliary devices such as HDMI cables, Bluetooth connections, or USB devices from the Sound Bar before initiating the reset.

4. Allow Time for Reset: When performing a reset, it is important to be patient. Give the Sound Bar sufficient time to complete the reset process before attempting to use it again.

5. Keep Firmware Updated: Regularly check for firmware updates on the TaoTronics website and install them as recommended. Updated firmware can resolve many underlying issues and enhance the performance of your sound bar.

By following these final tips and recommendations, you can ensure a successful reset of your TaoTronics Sound Bar and enjoy optimal audio performance once again.


1. How do I reset my TaoTronics Sound Bar to factory settings?

To reset your TaoTronics Sound Bar to its factory settings, follow these steps:
Step 1: Locate the power button on the back of the soundbar and ensure it is turned off
Step 2: Press and hold the Volume Down and Input buttons simultaneously
Step 3: While holding the buttons, turn the power button on
Step 4: Continue holding the Volume Down and Input buttons for about 10 seconds, until the soundbar’s LED lights start flashing
Step 5: Release the buttons and wait for the soundbar to reset. This may take a few moments. Once reset, the soundbar will power off and turn back on automatically.

2. Will resetting my TaoTronics Sound Bar delete any saved settings or paired devices?

No, resetting your TaoTronics Sound Bar will not delete any saved settings or paired devices. Resetting the soundbar simply restores it to its original factory settings, removing any customized settings or configurations that you may have made.

3. Why would I need to reset my TaoTronics Sound Bar?

There can be several reasons to reset your TaoTronics Sound Bar. Some common scenarios include resolving technical issues, troubleshooting sound-related problems, or clearing any glitches that may have occurred due to firmware updates or software conflicts. Resetting the soundbar can help in restoring it to a stable state and resolving any issues you may be experiencing.

The Conclusion

In conclusion, resetting a TaoTronics Sound Bar is a straightforward process that can be done by following a few simple steps. By turning off the soundbar, disconnecting all cables, and pressing the reset button for a few seconds, users can easily resolve any issues they may be experiencing with the device. Additionally, the step-by-step guide provided ensures that the reset process is easy to understand and execute. Overall, resetting the TaoTronics Sound Bar is an effective solution for troubleshooting and improving the device’s performance.

Leave a Comment