How Do I Reset My Blink Camera?

If you are experiencing problems with your Blink camera, resetting it may help to resolve the issue. The process for resetting a Blink camera is straightforward and can be done in just a few steps. Here is a step-by-step guide on how to reset your Blink camera.

1. Locate the reset button: The reset button is typically located on the back of the camera. It is a small, circular button that is recessed into the camera’s body.

2. Press and hold the reset button: Using a paperclip or a similar object, press and hold the reset button for at least 10 seconds.

3. Wait for the camera to reset: After you release the reset button, the camera will begin to reset. This process may take a few minutes, so be patient.

4. Reconnect the camera: Once the camera has been reset, you will need to reconnect it to your Wi-Fi network. To do this, open the Blink app and follow the prompts to add a new device.

5. Test the camera: After you have reconnected the camera, test it to make sure it is working properly.

If you are still experiencing issues with your Blink camera after resetting it, you may need to contact Blink support for further assistance.

FAQs

1. How do I reset my Blink camera?

To reset your Blink camera, press and hold the button on the back of the camera for about 20 seconds until the LED light turns off and back on again.

2. What if my Blink camera is not resetting?

If your Blink camera is not resetting, try removing the batteries and waiting for a few minutes before reinserting them. If this does not work, contact Blink customer support for further assistance.

3. Will resetting my Blink camera erase all my settings and recordings?

Yes, resetting your Blink camera will erase all your settings and recordings. Make sure to back up any important footage before resetting your camera.

4. Why would I need to reset my Blink camera?

You may need to reset your Blink camera if it is not connecting to your Wi-Fi network, if you are experiencing frequent disconnections, or if you are having trouble accessing your camera’s live feed.

Leave a Comment